After getting started in the app.  You will see that the app has 5 tabs and a 3 line (hamburger) menu:

• Inputs
  • On this tab you can select and add relevant inputs for the current scan session.
  • You also have the ability to scan samples and shutdown the scanner.
• Map
  • This tab shows your location as a blue dot.
  • Green pin drops are plotted when scans from the current scan session are accepted
  • Blue pin drops are historic scan locations from previous scan sessions that have been loaded from the History tab.
• History
  • Shows the scans from previous sessions. 
  • You can now plot the scan pins to the map for use while scanning.  This will help you return to the previous scanned locations.
  • You can also see the images from previous scanning sessions.  Note: The images are stored on the scanner.  So you must be connected to the scanner that was used to view the images.
• Wi-Fi
  • This tab allows you to connect to an existing Wi-Fi. 
  • The scanner will automatically reconnect to the previously used network.
  • The scanner and phone must be connected to the same network to readily view images during the scanning process.
  • This feature is not available on legacy firmware.
• Settings 
  • Selecting a checkbox next to a setting will toggle the settings on or off.
  • Beta Crops - Add the extra Beta Crops for use while scanning.
  • Linked Inputs - Allows you to build a truncating list of Growers, Farms and Fields. Note: Selecting a Grower filters the list of available Farms.  Selecting a Farm filters the list of available Fields.
  • Lock Inputs - Prevents the inputs from being changed while scanning.
  • Map Pins - Toggles the pin drops on/off.
  • Delete Inputs - Allows you to delete any non-selected input.
  • Lab Tissue Sampling - Changes the screen color profile and automatically starts a Lab Sampling mode.  Lab numbers are automatically generated and tagged to your scans.  Note: This feature is not available on legacy firmware.
  • Screen Timeout - When enabled, it keeps the screen active when the Leaftech Ag App is running, which help to prevent Bluetooth disconnects.
• Hamburger Menu
  • Scanner Info - Displays technical info about the scanner.  The details might be requested by support.
  • Scans on Device - Shows a menu of scans waiting to upload. 
  • Help Desk - Opens the Help Desk.
  • Connectivity Issues? - Opens the Connectivity Troubleshooting support page.
  • GPS Issues? - Opens a page that gives some tips on correcting GPS issues.
  • Scan Results - Opens the Power BI app.

Next Article:  Connecting the scanner to Wi-Fi